Quick Answer: Is Load And Resistance The Same?

What is meant by load resistance?

Load Resistance Defined At the most basic level, load resistance is the cumulative resistance of a circuit, as seen by the voltage, current, or power source driving that circuit.

Everything between the “place where the current goes out” and “the place where the current comes in” contributes to load resistance..

Is a resistor considered a load?

Devices called resistors are built to provide precise amounts of resistance in electric circuits. … Any device that performs some useful task with electric power is generally known as a load. Sometimes resistor symbols are used in schematic diagrams to designate a non-specific load, rather than an actual resistor.

What does a LED resistor do?

Resistors in Light Emitting Diode (LED) Circuits Such a resistor is often called a ballast resistor. The ballast resistor is used to limit the current through the LED and to prevent that it burns. If the voltage source is equal to the voltage drop of the LED, no resistor is required.

What is the relationship between current and resistance?

The relationship between current, voltage and resistance is expressed by Ohm’s Law. This states that the current flowing in a circuit is directly proportional to the applied voltage and inversely proportional to the resistance of the circuit, provided the temperature remains constant.

What is an example of an electrical load?

In electric power circuits examples of loads are appliances and lights. The term may also refer to the power consumed by a circuit. The term is used more broadly in electronics for a device connected to a signal source, whether or not it consumes power.

Which is more dangerous high voltage or high current?

Voltage vs. Amperage. Voltage and amperage are two measures of electrical current or flow of electrons. … An electrical current at 1,000 volts is no more deadly than a current at 100 volts, but tiny changes in amperage can mean the difference between life and death when a person receives an electrical shock.

Does voltage increase with resistance?

Ohm’s law states that the electrical current (I) flowing in an circuit is proportional to the voltage (V) and inversely proportional to the resistance (R). Therefore, if the voltage is increased, the current will increase provided the resistance of the circuit does not change.

What is the relationship between a load and resistance in an electrical circuit?

“The load resistance in a circuit is the effective resistance of all of the circuit elements excluding the emf source. In energy terms, it can be used to determine the energy delivered to the load by electrical transmission and there appearing as internal energy to raise the temperature of the resistor.

What is the difference between resistance and internal resistance?

Internal resistance is the resistance within a battery, or other voltage source, that causes a drop in the source voltage when there is a current. … External resistance or simply called Resistance is generally referred as the opposition to the flow of current offered by any load.

What is meant by load current?

1. Load current in this context is simply the current thru the wire. As you say, a load consumes power. That power is delivered electrically, which means it is the product of voltage and current. The load current is just that current.

How does electricity travels in a circuit?

Electrical engineers say that, in an electrical circuit, electricity flows one direction: out of the positive terminal of a battery and back into the negative terminal. Electronic technicians say that electricity flows the other direction: out of the negative terminal of a battery and back into the positive terminal.